|
|
Build Your Online Product Catalogs?
| Product Name: |
Motor high pressure sprayer
|
| Supply Ability: |
5000 |
| Related proudcts |
|
| Specifications |
W.G : main : 38.5KG, pipe :11KG |
| Price Term: |
FOB/CIF |
| Port of loading: |
Ningbo |
| Minimum Order |
2sets |
| Unit Price: |
USD266 |
|
Name and code OCS-22A OCS-22B OCS-30A
"High
pressure
water
pump
" plunger &number*dia*tenor (mm) 3*22*16 3*22*16 3*30*20
work pressure (bar) 10-40 10-40 10-40
flow (L/min) 13-22 13-22 30-40
rpm (r.p.m) 800-1200 800-1200 800-1200
pressure relief yes no yes
"Gasoline
engine" machine type ZS168FA ZS168FA ZS168FB
max power(kw)and rpm(r/min) 3.2/3600 3.2/3600 3.2/3600
horsepower(HP) 5.5 5.5 6.5
starting mode hand-pulled rope hand-pulled rope hand-pulled rope
durg bucket (L) no yes no
Applied range
This machine is applied in farmland, orchard, tea garden, green belt, lawn, vegetable planting base ,drug and water spraying of pergola crop. Also it is can used to pump irrigation (which can get higher than other general water pump)
Configuration principle
FNZ series motor high pressure sprayer is consist of gasoline engine,three-cylinder plunger high pressure pump support, reel pipe, sprayer shooting part .
Packing:
W.G : main : 38.5KG, pipe :11KG
Ctn size: main 83*35.5*47.5cm pipe 47*28*33.5cm
Operation Instruction
1 Check every fastener and make sure that the sprayer and the motor are installed firmly on the frame.
2 set the two pullies in s straight line ,and the belt in an appropriate tightness.
3 Every joint of the hoses must be tightened to prevent from,leaking
4 before starting motor,turn on outel swiches(67)and (68/69),which are connected with high-pressure outlet glued pipe.
5 start motor to diver sprayer and keep an appropriate rotational speed,open the switch of spray gun,when water goes out,turn off outlet switch(67).Adjust pressure -regulating screw(60)and keep a pressute between 21_35KG,then turn off the switch of spray gun.
6 turn on outlet switches(68/69)and begin to spray.
7after spraying is finished ,operate the sprayer with clean water to clear the chemical residue.
B
Pump lubrication
1 Replace the engine oil after the sprayer has been used for the first 10hours,50hours,and thence every 70 hours.
2 Drain away the dirty engine oil by scr |
| Company: |
yongkang ocean IMP&EXP.co.,LTD
|
| Contact: |
Ms. Ju vicky |
| Address: |
5th,NO31,nanyuan road east,yongkang,zhejiang |
| Postcode: |
312300 |
| Tel: |
86-0579-87172043 |
| Fax: |
86-0579-87172042 |
| E-mail: |
|
|
|
|
Home
